Disc harrows
Finishing mower
DL-FM
Lawn mower for maintained grass, pasture finishing and turf areas
The Finishing Mower, also known as a lawn mower or pasture finishing mower, is designed for clean, even cutting of maintained grass, lawns, parks, clean pastures and recreational turf.
It is suitable for groundskeeping, estate maintenance, turf management and pasture finishing where cut quality matters.
Unlike a rotary slasher, which is used for rough pasture and light brush cutting, a finishing mower is built for cleaner conditions and lower cutting height.
The machine uses an enclosed deck with belt-driven spindle assemblies. Each spindle carries a cutting blade that rotates at suitable speed for a clean, even cut on maintained grass. The enclosed deck helps contain clippings and direct the discharge pattern, while caster wheels help maintain consistent cutting height across maintained grass areas.
DELIN Agricultural Machinery supplies DL-FM series finishing mowers with cutting widths from 1200 to 2100 mm, cutting height from 25 to 100 mm and matched tractor power from 18 to 70 HP.





Additional photos show configuration examples. Colour and equipment may vary by model; please confirm your required configuration with your enquiry.
DL-FM finishing mower series
| DELIN Model | Cutting Width | Cutting Height | Weight | Linkage | Matched Power |
|---|---|---|---|---|---|
| DL-FM12 | 1200 mm | 25–100 mm | 120 kg | Three-point semi-mounted | 18–30 HP |
| DL-FM15 | 1500 mm | 25–100 mm | 180 kg | Three-point semi-mounted | 45–60 HP |
| DL-FM18 | 1800 mm | 25–100 mm | 220 kg | Three-point semi-mounted | 45–60 HP |
| DL-FM21 | 2100 mm | 25–100 mm | 350 kg | Three-point semi-mounted | 60–70 HP |
Final specifications vary by confirmed model and configuration.
Finishing mower selection guide
| DELIN Model | Cutting Width | Cutting Height | Weight | Matched Power |
|---|---|---|---|---|
| DL-FM12 | 1200 mm | 25–100 mm | 120 kg | 18–30 HP |
| DL-FM15 | 1500 mm | 25–100 mm | 180 kg | 45–60 HP |
| DL-FM18 | 1800 mm | 25–100 mm | 220 kg | 45–60 HP |
| DL-FM21 | 2100 mm | 25–100 mm | 350 kg | 60–70 HP |
Finishing mower vs rotary slasher
| Item | Finishing Mower | Rotary Slasher / Rotary Mower |
|---|---|---|
| Main Use | Lawn, turf and clean grass cutting | Pasture, rough grass and light brush areas |
| Cutting Height | 25–100 mm | 100–300 mm |
| Deck Type | Enclosed deck | Open cutter deck |
| Cutting System | Belt drive and spindle blade system | Swing blades on blade carrier |
| Field Condition | Maintained grass, lawns, parks, clean pasture | Rough pasture, weeds, uneven ground, farm edges |
| Cutting Finish | Clean and even finish | Functional clearing, rough finish |
| Selection Logic | Choose when low cutting height and clean finish matter | Choose when vegetation is taller, thicker or rougher |
The difference is not only size or price. It is about what the customer is cutting and what finish they expect.
Not sure which mower to choose?
Different mowing jobs require different machines.
A finishing mower is suitable for maintained grass and clean cutting finish, while a rotary slasher is better for rough grass and light brush areas.
A flail mower may be selected for orchards, roadsides, banks or residue management by model. Disc mowers and drum mowers are used for hay and forage cutting.
If you are comparing finishing mowers, rotary slashers, flail mowers, disc mowers or drum mowers, please check the mower category before ordering.
The key questions are:
What grass or vegetation is being cut?
What finish does the customer expect?
What tractor power is available?
Key features
Enclosed mower deck
Closed deck structure helps contain clippings and produce a controlled discharge pattern for clean grass finishing.
Blade spindle and belt drive assembly
Belt drive transfers power to the spindle assemblies and supports stable blade operation across the working width.
PTO gearbox and drive shaft
Transfers power from the tractor PTO to the belt drive and spindle system.
Three-point semi-mounted hitch frame
Connects the mower to the tractor for field operation, lifting and transport.
Front and rear caster wheels
Follow ground contour and help maintain consistent cutting height across uneven maintained grass areas.
Rear discharge opening
Directs clippings outward during operation and helps spread cut material behind the mower.
Applications
Best-fit scenarios
• Lawn mowing and groundskeeping
• Clean pasture finishing after grazing
• Park and recreational turf maintenance
• Estate and property grass management
• Turf farm maintenance
• Sports field and playing field grass cutting
• Orchard floor management where a clean finish is required
• Farms using 18–70 HP tractors
• Distributors supplying grounds maintenance and turf equipment
Not recommended for
• Rough pasture with stones, debris or woody material
• Shrubland or overgrown field vegetation
• Cutting height above 100 mm
• Slopes beyond machine and tractor stability
• Replacing a rotary slasher for rough vegetation management
• Heavy forestry or brush clearing
• Hay harvesting where clean forage cutting is required
Customization options
Cutting width options
• 1200 mm
• 1500 mm
• 1800 mm
• 2100 mm
Mower configuration options
• Caster wheel type by model
• Rear discharge configuration
• Cutting height adjustment
• Blade and spindle configuration by model
Tractor matching options
• Tractor power range
• Three-point semi-mounted linkage
• PTO shaft configuration by model
Branding and export options
• Paint color
• Logo and private label
• Model name
• Data plate information
• Export packing method
• Container loading plan
Why this machine exists
Wrong mower selection can lead to poor finish, uneven cutting, clogging, vibration and faster wear.
A rotary slasher was not designed for fine finishing, while specialized turf maintenance equipment may be unnecessary for ordinary farm and pasture maintenance.
The Finishing Mower fills this middle position. It is used when the grass is already maintained, the customer expects a clean finish, and tractor-mounted mowing capacity is still needed.
For distributors, it fills the market need where a rotary slasher would leave too rough a cut, but specialized turf maintenance equipment is not required.
Why choose delin agricultural machinery
For finishing mowers, stable cutting performance depends on deck enclosure and rigidity, spindle bearing assembly, belt drive alignment and tension, blade balance, caster wheel fitment and gearbox mounting.
DELIN Agricultural Machinery focuses on enclosed deck welding, spindle assembly and bearing installation, belt drive tension and alignment, blade balance inspection, caster wheel mounting, and pre-shipment spindle rotation and deck level checks.
These details help the mower deliver a clean, even cut on maintained grass and remain stable during repeated use in groundskeeping and pasture finishing work.
Faq
Q1: what is a finishing mower used for?
It is used for clean, even cutting of maintained grass, lawns, parks, clean pastures, turf and estate grounds.
Q2: is a finishing mower the same as a rotary slasher?
No. A rotary slasher is for rough pasture, brush and higher cutting height. A finishing mower is for maintained grass and clean finishing.
Q3: what is the difference between a finishing mower and a rotary slasher?
A finishing mower uses an enclosed deck and belt-driven spindle system for clean cutting at 25–100 mm height. A rotary slasher uses an open deck and swing blades for rough vegetation at 100–300 mm height.
Q4: when should I choose a finishing mower instead of a rotary slasher?
Choose a finishing mower when the grass is maintained, the cutting height needed is lower, and the customer expects a clean, even finish. Choose a rotary slasher for rough vegetation.
Q5: what cutting height is available?
Reference cutting height is 25–100 mm by model.
Q6: what cutting widths are available?
Available cutting widths are 1200 mm, 1500 mm, 1800 mm and 2100 mm.
Q7: why does it use belt drive instead of direct gear drive?
Belt drive supports stable blade speed for clean cutting and may help absorb limited impact in suitable mowing conditions.
Q8: what tractor power is required?
Matched tractor power ranges from 18–30 HP for DL-FM12 to 60–70 HP for DL-FM21.
Q9: what type of blades does it use?
It uses spindle-mounted blades driven by belt pulleys. The blades rotate at suitable speed for a clean, even cut on maintained grass.
Q10: what do the caster wheels do?
The front and rear caster wheels follow ground contour and help maintain consistent cutting height across maintained grass areas.
Q11: can the blades be replaced?
Yes. Spindle blades are replaceable wear parts. Replacement depends on usage frequency, grass condition and maintenance practice.
Q12: why does it use an enclosed deck?
An enclosed deck helps contain clippings, supports controlled discharge and improves cutting finish on maintained grass.
Q13: can it cut rough pasture or brush?
No. This machine is designed for maintained grass. Rough vegetation may clog the deck, dull blades and affect belt drive performance. Use a rotary slasher for rough conditions.
Q14: what should buyers confirm before ordering?
Please confirm tractor HP, required cutting width, grass type, typical field condition, cutting height requirement and whether the area has stones or debris.
Inquiry message
Please send your tractor HP, grass type and required cutting width.
We will help check whether DL-FM12, DL-FM15, DL-FM18, DL-FM21, a rotary slasher or another mower type is more suitable for your grass condition.