Disc harrows
Rotary slasher
DL-RS
Rotary mower for pasture, rough grass and light brush areas
The Rotary Slasher, also known as a rotary mower or rotary cutter, is designed for pasture maintenance, rough grass cutting, farm edge mowing and light brush areas.
It is suitable for grazing land, overgrown grass, pasture edges and general farm vegetation control.
Unlike a finishing mower, which is used for cleaner lawn or turf cutting, a rotary slasher is built for rougher field conditions. It works at a higher cutting height and is suited for tall grass, weeds and light brush where a fine finish is not required.
The machine uses a cutter deck housing with swing blades driven by the tractor PTO. This structure helps rough cut material pass through during operation, while the front chain guard helps reduce flying debris.
DELIN Agricultural Machinery supplies DL-RS series rotary slashers with cutting widths from 1200 to 2100 mm, cutting height from 100 to 300 mm and tractor matching from 18 to 80 HP.





Additional photos show configuration examples. Colour and equipment may vary by model; please confirm your required configuration with your enquiry.
DL-RS rotary slasher series
| DELIN Model | Cutting Width | Cutting Height | Weight | Linkage | Matched Power |
|---|---|---|---|---|---|
| DL-RS12 | 1200 mm | 100–300 mm | 260 kg | Three-point semi-mounted | 18–30 HP |
| DL-RS15 | 1500 mm | 100–300 mm | 300 kg | Three-point semi-mounted | 45–60 HP |
| DL-RS18 | 1800 mm | 100–300 mm | 360 kg | Three-point semi-mounted | 45–60 HP |
| DL-RS21 | 2100 mm | 100–300 mm | 400 kg | Three-point semi-mounted | 60–80 HP |
Final specifications vary by confirmed model and configuration.
Rotary slasher selection guide
| DELIN Model | Cutting Width | Cutting Height | Weight | Matched Power |
|---|---|---|---|---|
| DL-RS12 | 1200 mm | 100–300 mm | 260 kg | 18–30 HP |
| DL-RS15 | 1500 mm | 100–300 mm | 300 kg | 45–60 HP |
| DL-RS18 | 1800 mm | 100–300 mm | 360 kg | 45–60 HP |
| DL-RS21 | 2100 mm | 100–300 mm | 400 kg | 60–80 HP |
Rotary slasher vs finishing mower
| Item | Rotary Slasher / Rotary Mower | Finishing Mower |
|---|---|---|
| Main Use | Pasture, rough grass and light brush areas | Lawn, turf and maintained grass cutting |
| Cutting Height | 100–300 mm | 25–100 mm |
| Deck Type | Open cutter deck | Enclosed deck |
| Cutting System | Swing blades on blade carrier | Belt drive and spindle blade system by model |
| Field Condition | Rough pasture, weeds, uneven ground, farm edges | Maintained grass, lawns, parks, clean pasture |
| Cutting Finish | Functional clearing, rough finish | Clean and even finish |
| Selection Logic | Choose when vegetation is taller, thicker or rougher | Choose when low cutting height and clean finish matter |
The difference is not only size or price. It is about what the customer is cutting and what finish they expect.
Not sure which mower to choose?
Different mowing jobs require different machines.
A rotary slasher is for rough pasture and field maintenance. A finishing mower is for maintained grass and cleaner surface finish. A flail mower is often selected for orchards, roadsides, banks or residue management by model. Disc mowers and drum mowers are used for hay and forage cutting.
If your customer only says “I need a mower,” the first question should be:
What vegetation are they cutting?
The second question should be:
What finish do they expect after cutting?
Key features
Cutter deck housing
Open deck structure helps rough cut material pass through during pasture and rough grass mowing.
Blade carrier and swing blade assembly
Supports free-swinging blades for cutting rough grass, weeds and light brush areas.
PTO gearbox and drive shaft
Transfers power from the tractor PTO to the cutting system.
Three-point semi-mounted hitch frame
Connects the mower to the tractor for field operation, lifting and transport.
Front chain guard
Helps reduce flying debris during rough field mowing.
Rear support wheel and skid shoes
Support cutting height control and help the mower move over uneven ground by model.
Applications
Best-fit scenarios
• Pasture maintenance
• Rough grass cutting
• Grassland edge mowing
• Light brush areas
• Farm road and boundary maintenance
• Overgrown field vegetation control
• Grazing area management
• Farms using 18–80 HP tractors
• Distributors supplying farm maintenance mowing equipment
Not recommended for
• Fine lawn or turf finishing
• Very low cutting height requirements
• Golf course or park-level finish
• Heavy forestry clearing
• Thick woody brush beyond machine capacity
• Stone-heavy fields with high impact risk
• Hay harvesting where clean forage cutting is required
Customization options
Cutting width options
• 1200 mm
• 1500 mm
• 1800 mm
• 2100 mm
Mower configuration options
• Rear support wheel by model
• Front chain guard
• Skid shoes by model
• Cutting height configuration
• Swing blade specification
Tractor matching options
• Tractor power range
• Three-point semi-mounted linkage
• PTO shaft configuration by model
Branding and export options
• Paint color
• Logo and private label
• Model name
• Data plate information
• Export packing method
• Container loading plan
Why this machine exists
Most farmland does not look like a lawn.
Pastures grow thick. Weeds mix with grass. Farm edges and rough areas can become difficult to manage if they are not cut regularly.
A finishing mower may leave a cleaner surface, but it is not the right tool for rough vegetation.
The Rotary Slasher exists for this rough-cutting stage. It cuts higher, uses a swing blade system and works with an open cutter deck to handle pasture and rough grass conditions.
It is not a lawn finishing tool and not a forestry clearing machine. It is a practical tractor-powered mower for pasture maintenance and general farm vegetation control.
For distributors, it fills the market need between lawn-level finishing mowers and heavier brush or forestry equipment. It is the right category when the field is too rough for a finishing mower, but the vegetation is not heavy enough to require specialized forestry tools.
Why choose delin agricultural machinery
For rotary slashers, stable operation depends on deck frame rigidity, blade carrier balance, swing blade fitment, gearbox mounting, PTO alignment, hitch frame strength and chain guard coverage.
DELIN Agricultural Machinery focuses on deck welding control, blade carrier assembly, blade swing clearance, PTO gearbox installation, hitch frame inspection, support wheel fitment and pre-shipment rotation checks.
These details help the mower maintain stable cutting in rough grass and pasture conditions while remaining simple to maintain.
Faq
Q1: what is a rotary slasher used for?
It is used for pasture maintenance, rough grass cutting, farm clearing and light brush areas.
Q2: is a rotary slasher the same as a finishing mower?
No. A finishing mower is for cleaner lawn or turf cutting. A rotary slasher is for rougher field conditions and higher cutting height.
Q3: what is the difference between a rotary slasher and a finishing mower?
A rotary slasher uses an open deck and swing blades for rough vegetation at 100–300 mm cutting height. A finishing mower uses an enclosed deck and is designed for cleaner cutting at lower height.
Q4: when should I choose a rotary slasher instead of a finishing mower?
Choose a rotary slasher when vegetation is taller, thicker or mixed with light brush, and when a lawn-level finish is not required.
Q5: what cutting height is available?
Reference cutting height is 100–300 mm by model.
Q6: what cutting widths are available?
Available cutting widths are 1200, 1500, 1800 and 2100 mm.
Q7: what tractor power is required?
Matched tractor power ranges from 18–30 HP for DL-RS12 to 60–80 HP for DL-RS21.
Q8: what type of blades does it use?
It uses swing blades mounted on a blade carrier. The blades can pivot under impact in suitable conditions, but frequent stones or hard obstacles should still be avoided.
Q9: can it cut brush?
It can handle light brush and small woody stems in suitable conditions. It is not designed for heavy forestry or thick woody vegetation.
Q10: can the blades be replaced?
Yes. Swing blades are replaceable wear parts. Replacement depends on usage frequency and vegetation type.
Q11: why does it use an open deck?
An open deck helps rough cut material pass through and reduces clogging risk in rough vegetation compared with enclosed finishing mower decks.
Q12: is it PTO driven?
Yes. It is powered by the tractor PTO.
Q13: how do I choose between rotary slasher, finishing mower and flail mower?
Choose a rotary slasher for rough pasture and light brush, a finishing mower for maintained grass and clean surface finish, and a flail mower for orchards, roadside maintenance, banks or mulching work by model.
Q14: what should buyers confirm before ordering?
Tractor HP, required cutting width, vegetation type, field condition, cutting height requirement and expected cutting finish should be confirmed.
Inquiry message
Please send your tractor HP, vegetation type and required cutting width.
We will help check whether DL-RS12, DL-RS15, DL-RS18, DL-RS21, a finishing mower or another mower type is more suitable for your field condition.