Disc harrows
Heavy-duty rotary cutter
DL-HRC
Large rotary slasher for orchard, grassland and field maintenance
The Heavy-Duty Rotary Cutter, also known as a heavy-duty rotary slasher, is designed for large-scale grass cutting and field vegetation maintenance.
It is suitable for orchards, grassland, airports, farm roadsides and open field areas where a standard rotary slasher does not provide enough working width for the job.
The DL-HRC series covers cutting widths from 2750 to 6000 mm and matches tractors from 100 to 220 HP. Mounted and trailed configurations are available according to working width and field layout.
This machine uses a rotary blade cutting system. It should not be confused with a flail mower, which uses a rotor with flail knives for shredding and mulching.

02 / 03
Side view
Additional photograph pending
Image placeholder
03 / 03
Detail view
Additional photograph pending
Image placeholder
Mounted models
| DELIN Model | Cutting Width | Cutting Height | Blade Count | Tire Type / Number | Weight | Linkage | Matched Power |
|---|---|---|---|---|---|---|---|
| DL-HRC28 | 2750 mm | 100–300 mm | 4 | 16×6.50-8 / 2 pcs | 680 kg | Type II three-point mounted | 100 HP |
| DL-HRC35 | 3500 mm | 100–300 mm | 4 | 16×6.50-8 / 2 pcs | 990 kg | Type II three-point mounted | 120 HP |
Trailed models
| DELIN Model | Cutting Width | Cutting Height | Blade Count | Tire Type / Number | Weight | Linkage | Matched Power |
|---|---|---|---|---|---|---|---|
| DL-HRC35T | 3500 mm | 100–300 mm | 6 | 165/70R13 / 6 pcs | 1650 kg | Trailed | 100–130 HP |
| DL-HRC45 | 4500 mm | 100–300 mm | 6 | 165/70R13 / 6 pcs | 1800 kg | Trailed | 120–160 HP |
| DL-HRC60 | 6000 mm | 100–300 mm | 8 | 165/70R13 / 8 pcs | 2470 kg | Trailed | 180–220 HP |
Final specifications vary by confirmed model and configuration.
Heavy-duty rotary cutter selection guide
| DELIN Model | Cutting Width | Blade Count | Weight | Connection | Matched Power |
|---|---|---|---|---|---|
| DL-HRC28 | 2750 mm | 4 | 680 kg | Three-point mounted | 100 HP |
| DL-HRC35 | 3500 mm | 4 | 990 kg | Three-point mounted | 120 HP |
| DL-HRC35T | 3500 mm | 6 | 1650 kg | Trailed | 100–130 HP |
| DL-HRC45 | 4500 mm | 6 | 1800 kg | Trailed | 120–160 HP |
| DL-HRC60 | 6000 mm | 8 | 2470 kg | Trailed | 180–220 HP |
Final specifications vary by confirmed model and configuration.
Mounted vs trailed — how to choose
| Connection Type | Model Examples | Best For |
|---|---|---|
| Three-point mounted | DL-HRC28 / DL-HRC35 | Orchards, tighter turning areas, rear-mounted operation, tractors around 100–120 HP |
| Trailed | DL-HRC35T / DL-HRC45 / DL-HRC60 | Wider grassland, open fields, airport areas, operations where working width matters more than maneuverability |
Mounted models connect to the tractor three-point linkage and can be lifted for headland turns and transport.
Trailed models connect through the drawbar and run on their own wheel system, allowing wider cutting widths and heavier deck construction without placing the full machine load on the tractor linkage.
Standard rotary slasher vs heavy-duty rotary cutter
| Item | Standard Rotary Slasher | Heavy-Duty Rotary Cutter |
|---|---|---|
| Main Use | Pasture maintenance and small-farm vegetation control | Large-scale orchard, grassland and field mowing |
| Cutting Width | 1200–2100 mm | 2750–6000 mm |
| Tractor Power | 18–80 HP | 100–220 HP |
| Connection | Three-point semi-mounted | Mounted or trailed |
| Weight Range | 260–400 kg | 680–2470 kg |
| Typical Field | Small pasture, paddock, farm edge | Wide orchard, large grassland, airport, open field |
| Selection Logic | Choose when tractor power and field size are limited | Choose when working width and daily field coverage matter |
The choice is not about quality. It is about the scale of the operation.
Not sure which mower category to choose?
Different mowing operations need different machine categories.
Standard rotary slasher: small to medium pasture and farm vegetation control
Heavy-Duty Rotary Cutter: large-scale orchard, grassland and field mowing
Finishing Mower: maintained grass, lawn and clean pasture finishing
Flail Mower: orchard floor, roadside maintenance and mulching by model
Disc Mower / Drum Mower: hay and forage cutting
Hay Rake: hay gathering after cutting
If a customer says “I need a mower for my orchard,” the next question is field scale. A 2-metre slasher and a 4.5-metre cutter are not solving the same productivity problem.
Key features
Heavy-duty cutter deck frame
Reinforced cutter deck supports wide-area mowing and long working hours in orchard, grassland and field maintenance operations.
Swing blade assembly
Free-swinging blades are mounted on the blade carrier for rotary cutting. The blade structure is suitable for grass, weeds and light vegetation under proper field conditions.
PTO gearbox and drive system
Transfers tractor PTO power to the cutter deck through gearbox and drive shaft. Proper drive alignment is important for stable operation.
Three-point hitch frame
Mounted models use a three-point hitch frame for tractor connection, lifting, turning and transport.
Drawbar hitch and wheel carriage
Trailed models use a drawbar connection and wheel carriage to support wider cutting width and heavier machine structure.
Skid shoes and support wheels
Help guide cutting height and support ground-following movement during field operation.
Safety guard assembly
Chain guard or rubber guard can be configured by model to help reduce thrown material during mowing.
Applications
Best-fit scenarios
• Large-scale orchard grass management
• Wide grassland and pasture mowing
• Airport ground maintenance
• Field edge vegetation clearing
• Farm road and boundary mowing
• Open field vegetation maintenance
• Operations using 100–220 HP tractors
• Customers upgrading from standard rotary slashers
Not recommended for
• Small paddocks or hobby farms
• Tractors below 100 HP
• Lawn, turf or park finishing
• Heavy forestry clearing
• Thick woody vegetation
• Hay harvesting where clean forage cutting is required
• Narrow orchard rows with limited turning space
Customization options
Cutting width options
• 2750 mm
• 3500 mm
• 4500 mm
• 6000 mm
Connection options
• Three-point mounted
• Trailed
• Drawbar configuration by model
• Support wheel configuration by model
Cutter configuration options
• Blade count by model
• Blade specification
• Skid shoe setting
• Safety guard type
• PTO shaft matching
Branding and export options
• Paint color
• Logo and private label
• Model name customization
• Data plate information
• Export packing method
• Container loading plan
Why this machine exists
A standard rotary slasher works well behind a 40 or 60 HP tractor on small pasture or farm maintenance work.
But when the mowing area becomes much larger, working width becomes the bottleneck.
The Heavy-Duty Rotary Cutter exists to solve this scale problem. It does not replace every mower category. It serves customers who already have stronger tractors and need more field coverage per pass.
For distributors, this category matters because the buyer is different from the small-farm rotary slasher customer. They usually care about daily area coverage, tractor matching, transport method and cost per hectare.
Why choose delin agricultural machinery
For heavy-duty rotary cutters, stable long-hour mowing depends on cutter deck welding, gearbox installation, blade carrier balance, swing blade clearance, PTO drive alignment, hitch frame strength and guard coverage.
DELIN Agricultural Machinery focuses on deck welding control, gearbox mounting inspection, blade carrier assembly, blade swing clearance checking, PTO alignment testing, hitch frame weld inspection and pre-shipment rotation checks.
These details help the cutter match large-area mowing work with stable operation and straightforward maintenance.
Faq
Q1: what is a heavy-duty rotary cutter used for?
It is used for large-scale mowing and vegetation maintenance in orchards, grassland, airports, farm roadsides and open field areas.
Q2: is it the same as a standard rotary slasher?
No. A standard rotary slasher is usually smaller and matched with lower tractor power. A heavy-duty rotary cutter has wider cutting width and is designed for larger fields and higher tractor power.
Q3: is it a flail mower?
No. This machine uses a rotary blade cutting system. A flail mower uses a rotor with flail knives for shredding and mulching.
Q4: what tractor power is required?
The DL-HRC series matches tractors from 100 to 220 HP depending on model.
Q5: what cutting widths are available?
Available cutting widths include 2750 mm, 3500 mm, 4500 mm and 6000 mm.
Q6: should I choose mounted or trailed type?
Mounted models are suitable for tighter turning areas and tractors around 100–120 HP. Trailed models are suitable for wider fields, larger cutting widths and higher daily coverage.
Q7: can it cut brush?
It can handle grass, weeds and light vegetation under suitable conditions. It is not designed for heavy forestry or thick woody vegetation clearing.
Q8: can it be used for lawn finishing?
No. For clean lawn or turf finishing, a finishing mower should be selected.
Q9: can it be used for hay cutting?
It is not the right tool for clean forage harvesting. For hay cutting, choose a disc mower or drum mower.
Q10: can OEM branding be provided?
Yes. Color, logo, model name, data plate and export packing can be customized for distributors.
Q11: what should buyers confirm before ordering?
Tractor HP, required cutting width, field type, vegetation condition, mounted or trailed preference and transport requirements should be confirmed.
Inquiry message
Please send:
• Tractor HP
• Required cutting width
• Field type
• Vegetation condition
• Mounted or trailed preference
We will help check whether DL-HRC28, DL-HRC35, DL-HRC35T, DL-HRC45, DL-HRC60 or another mower category is more suitable for your operation scale.