Delin Agricultural Machinery

DL-FM — Finishing mower

Finishing mower

DL-FM

Lawn mower for maintained grass, pasture finishing and turf areas

The Finishing Mower, also known as a lawn mower or pasture finishing mower, is designed for clean, even cutting of maintained grass, lawns, parks, clean pastures and recreational turf.

It is suitable for groundskeeping, estate maintenance, turf management and pasture finishing where cut quality matters.

Unlike a rotary slasher, which is used for rough pasture and light brush cutting, a finishing mower is built for cleaner conditions and lower cutting height.

The machine uses an enclosed deck with belt-driven spindle assemblies. Each spindle carries a cutting blade that rotates at suitable speed for a clean, even cut on maintained grass. The enclosed deck helps contain clippings and direct the discharge pattern, while caster wheels help maintain consistent cutting height across maintained grass areas.

DELIN Agricultural Machinery supplies DL-FM series finishing mowers with cutting widths from 1200 to 2100 mm, cutting height from 25 to 100 mm and matched tractor power from 18 to 70 HP.

DL-FM finishing mower series
DELIN ModelCutting WidthCutting HeightWeightLinkageMatched Power
DL-FM121200 mm25–100 mm120 kgThree-point semi-mounted18–30 HP
DL-FM151500 mm25–100 mm180 kgThree-point semi-mounted45–60 HP
DL-FM181800 mm25–100 mm220 kgThree-point semi-mounted45–60 HP
DL-FM212100 mm25–100 mm350 kgThree-point semi-mounted60–70 HP

Final specifications vary by confirmed model and configuration.

Finishing mower selection guide
DELIN ModelCutting WidthCutting HeightWeightMatched Power
DL-FM121200 mm25–100 mm120 kg18–30 HP
DL-FM151500 mm25–100 mm180 kg45–60 HP
DL-FM181800 mm25–100 mm220 kg45–60 HP
DL-FM212100 mm25–100 mm350 kg60–70 HP
Finishing mower vs rotary slasher
ItemFinishing MowerRotary Slasher / Rotary Mower
Main UseLawn, turf and clean grass cuttingPasture, rough grass and light brush areas
Cutting Height25–100 mm100–300 mm
Deck TypeEnclosed deckOpen cutter deck
Cutting SystemBelt drive and spindle blade systemSwing blades on blade carrier
Field ConditionMaintained grass, lawns, parks, clean pastureRough pasture, weeds, uneven ground, farm edges
Cutting FinishClean and even finishFunctional clearing, rough finish
Selection LogicChoose when low cutting height and clean finish matterChoose when vegetation is taller, thicker or rougher

The difference is not only size or price. It is about what the customer is cutting and what finish they expect.

Not sure which mower to choose?

Different mowing jobs require different machines.

A finishing mower is suitable for maintained grass and clean cutting finish, while a rotary slasher is better for rough grass and light brush areas.

A flail mower may be selected for orchards, roadsides, banks or residue management by model. Disc mowers and drum mowers are used for hay and forage cutting.

If you are comparing finishing mowers, rotary slashers, flail mowers, disc mowers or drum mowers, please check the mower category before ordering.

The key questions are:

What grass or vegetation is being cut?

What finish does the customer expect?

What tractor power is available?

Key features

Enclosed mower deck

Closed deck structure helps contain clippings and produce a controlled discharge pattern for clean grass finishing.

Blade spindle and belt drive assembly

Belt drive transfers power to the spindle assemblies and supports stable blade operation across the working width.

PTO gearbox and drive shaft

Transfers power from the tractor PTO to the belt drive and spindle system.

Three-point semi-mounted hitch frame

Connects the mower to the tractor for field operation, lifting and transport.

Front and rear caster wheels

Follow ground contour and help maintain consistent cutting height across uneven maintained grass areas.

Rear discharge opening

Directs clippings outward during operation and helps spread cut material behind the mower.

Applications
Best-fit scenarios

• Lawn mowing and groundskeeping

• Clean pasture finishing after grazing

• Park and recreational turf maintenance

• Estate and property grass management

• Turf farm maintenance

• Sports field and playing field grass cutting

• Orchard floor management where a clean finish is required

• Farms using 18–70 HP tractors

• Distributors supplying grounds maintenance and turf equipment

Not recommended for

• Rough pasture with stones, debris or woody material

• Shrubland or overgrown field vegetation

• Cutting height above 100 mm

• Slopes beyond machine and tractor stability

• Replacing a rotary slasher for rough vegetation management

• Heavy forestry or brush clearing

• Hay harvesting where clean forage cutting is required

Customization options

Cutting width options

• 1200 mm

• 1500 mm

• 1800 mm

• 2100 mm

Mower configuration options

• Caster wheel type by model

• Rear discharge configuration

• Cutting height adjustment

• Blade and spindle configuration by model

Tractor matching options

• Tractor power range

• Three-point semi-mounted linkage

• PTO shaft configuration by model

Branding and export options

• Paint color

• Logo and private label

• Model name

• Data plate information

• Export packing method

• Container loading plan

Why this machine exists

Wrong mower selection can lead to poor finish, uneven cutting, clogging, vibration and faster wear.

A rotary slasher was not designed for fine finishing, while specialized turf maintenance equipment may be unnecessary for ordinary farm and pasture maintenance.

The Finishing Mower fills this middle position. It is used when the grass is already maintained, the customer expects a clean finish, and tractor-mounted mowing capacity is still needed.

For distributors, it fills the market need where a rotary slasher would leave too rough a cut, but specialized turf maintenance equipment is not required.

Why choose delin agricultural machinery

For finishing mowers, stable cutting performance depends on deck enclosure and rigidity, spindle bearing assembly, belt drive alignment and tension, blade balance, caster wheel fitment and gearbox mounting.

DELIN Agricultural Machinery focuses on enclosed deck welding, spindle assembly and bearing installation, belt drive tension and alignment, blade balance inspection, caster wheel mounting, and pre-shipment spindle rotation and deck level checks.

These details help the mower deliver a clean, even cut on maintained grass and remain stable during repeated use in groundskeeping and pasture finishing work.

Faq

Q1: what is a finishing mower used for?

It is used for clean, even cutting of maintained grass, lawns, parks, clean pastures, turf and estate grounds.

Q2: is a finishing mower the same as a rotary slasher?

No. A rotary slasher is for rough pasture, brush and higher cutting height. A finishing mower is for maintained grass and clean finishing.

Q3: what is the difference between a finishing mower and a rotary slasher?

A finishing mower uses an enclosed deck and belt-driven spindle system for clean cutting at 25–100 mm height. A rotary slasher uses an open deck and swing blades for rough vegetation at 100–300 mm height.

Q4: when should I choose a finishing mower instead of a rotary slasher?

Choose a finishing mower when the grass is maintained, the cutting height needed is lower, and the customer expects a clean, even finish. Choose a rotary slasher for rough vegetation.

Q5: what cutting height is available?

Reference cutting height is 25–100 mm by model.

Q6: what cutting widths are available?

Available cutting widths are 1200 mm, 1500 mm, 1800 mm and 2100 mm.

Q7: why does it use belt drive instead of direct gear drive?

Belt drive supports stable blade speed for clean cutting and may help absorb limited impact in suitable mowing conditions.

Q8: what tractor power is required?

Matched tractor power ranges from 18–30 HP for DL-FM12 to 60–70 HP for DL-FM21.

Q9: what type of blades does it use?

It uses spindle-mounted blades driven by belt pulleys. The blades rotate at suitable speed for a clean, even cut on maintained grass.

Q10: what do the caster wheels do?

The front and rear caster wheels follow ground contour and help maintain consistent cutting height across maintained grass areas.

Q11: can the blades be replaced?

Yes. Spindle blades are replaceable wear parts. Replacement depends on usage frequency, grass condition and maintenance practice.

Q12: why does it use an enclosed deck?

An enclosed deck helps contain clippings, supports controlled discharge and improves cutting finish on maintained grass.

Q13: can it cut rough pasture or brush?

No. This machine is designed for maintained grass. Rough vegetation may clog the deck, dull blades and affect belt drive performance. Use a rotary slasher for rough conditions.

Q14: what should buyers confirm before ordering?

Please confirm tractor HP, required cutting width, grass type, typical field condition, cutting height requirement and whether the area has stones or debris.

Inquiry message

Please send your tractor HP, grass type and required cutting width.

We will help check whether DL-FM12, DL-FM15, DL-FM18, DL-FM21, a rotary slasher or another mower type is more suitable for your grass condition.