Delin Agricultural Machinery

DL-DLP — Deep tillage and land preparation machine

Deep tillage and land preparation machine

DL-DLP

Subsoiler combination machine for deep loosening and upper soil preparation

The Deep Tillage and Land Preparation Machine, also known as a subsoiler combination machine, is designed for fields that need deep compaction loosening and upper soil preparation in one operation.

A standard subsoiler loosens compacted soil below the normal working layer. In many fields, the upper soil still needs clod breaking or surface preparation afterward. This machine combines both steps by using front subsoiler shanks followed by rear disc harrow sections.

Its main value is reducing the need for a separate subsoiler pass followed by a separate harrowing pass. This can help reduce fuel use, labor time and tractor traffic while supporting better soil aeration and water movement in compacted fields.

The DL-DLP series is currently supplied as mounted type, with working widths from 2.5 m to 3.45 m, working depth from 350 mm to 450 mm and tractor power from 120 HP to 200+ HP.

DL-DLP series
DELIN ModelWorking WidthWorking DepthShank No.Shank SpacingDisc No.Disc DiameterDisc ThicknessDisc SpacingWeightMounting TypePower
DL-DLP252500 mm350–450 mm7 pcs680 mm20 pcs460 mm4 mm170 mm1320 kgMounted120–180 HP
DL-DLP323200 mm350–450 mm9 pcs660 mm28 pcs460 mm4 mm195 mm1490 kgMounted≥200 HP
DL-DLP353450 mm350–450 mm11 pcs640 mm32 pcs460 mm4 mm195 mm1670 kgMounted≥200 HP

Final specifications vary by confirmed model and configuration.

Deep tillage and land preparation machine selection guide
Model RangeBest ForWorking WidthWorking DepthTractor Power
DL-DLP25Medium-width deep loosening and surface preparation2.5 m350–450 mm120–180 HP
DL-DLP32Wider deep loosening for high-power tractors3.2 m350–450 mm≥200 HP
DL-DLP35Maximum width in this mounted range3.45 m350–450 mm≥200 HP
Key features

Front subsoiler shank assembly

Front shanks loosen compacted soil below the normal working layer and help reduce the need for a separate deep subsoiling pass.

Replaceable shank points

Replaceable points support soil penetration and seasonal maintenance when working in compacted or abrasive soil conditions.

Rear disc harrow section

Rear disc sections break clods and prepare the upper soil surface immediately after deep loosening.

Heavy-duty main frame

The main frame carries front shanks and rear disc sections together, supporting combined deep draft load and upper soil preparation load.

Mounted hitch frame

The mounted hitch frame connects the machine to the tractor for field operation and transport.

Working depth control structure

Working depth is matched according to soil compaction depth, tractor power and field requirement.

Rear roller / leveling component

Rear components help organize the soil surface after the rear disc section works through the loosened soil.

Applications
Best-fit scenarios

• Farms replacing subsoiler + disc harrow sequence

• Fields with compaction below the working layer

• Long-term cultivated land

• Medium and large farms

• Mechanized operations

• Soil aeration and water movement improvement

• Fields needing deep loosening plus upper soil preparation

• Customers who normally run a harrow after subsoiling

Not recommended for

• Fields without compaction problems

• Fine seedbed finishing only

• Small tractors below required power range

• Severe land reclamation with large stones or dense roots

• Very wet sticky clay

• Surface leveling only, where a disc harrow is enough

Deep tillage machine vs standard subsoiler
ItemDeep Tillage and Land Preparation MachineStandard Subsoiler
Main JobDeep loosening plus upper soil preparationDeep loosening only
Working StructureFront shanks + rear disc harrowShanks only
Field PassesCan reduce separate harrow passMay need follow-up harrowing
Best ForCompacted fields needing surface preparation afterwardFields needing only deep loosening
Choose WhenCustomer wants deep loosening and upper soil preparation togetherCustomer only needs hardpan breaking
Customization options

Working width options

Working width can be selected from 2.5 m to 3.45 m according to tractor power and field size.

Deep loosening options

Shank number, shank spacing, replaceable point type and working depth range can be confirmed according to compaction condition.

Upper soil preparation options

Rear disc harrow section, disc quantity, disc spacing and surface preparation requirement can be confirmed by model.

Strength options

Frame reinforcement, shank mounting points and replaceable wear parts can be matched according to soil resistance and expected working conditions.

Branding and export options

Color, logo, model plate, packaging and export documentation can be customized for distributors.

Why this machine exists

This machine exists for fields where deep loosening alone is not enough.

A standard subsoiler can break compacted soil below the working layer. But if the upper soil still needs clod breaking or preparation afterward, the farmer may need another pass with a disc harrow.

The Deep Tillage and Land Preparation Machine combines these two steps. It loosens the deeper compacted layer and prepares the upper soil surface in one operation.

For distributors, this product should be positioned as a solution for customers who need deep loosening but do not want to leave upper soil preparation for a second machine.

Why choose delin agricultural machinery

For deep tillage and land preparation machines, stable performance depends on shank strength, replaceable point quality, frame reinforcement, working depth consistency and rear disc section alignment.

DELIN Agricultural Machinery focuses on shank steel selection and heat treatment, replaceable point fitment, reinforcement at high-draft shank mounting points, disc gang alignment, bearing seat fitment, section spacing accuracy and pre-shipment assembly checks.

These manufacturing details help the machine handle deep draft loads while supporting upper soil preparation in the same field operation.

We support OEM/ODM customization according to tractor power range, compaction depth, working width, upper soil preparation requirement and branding needs.

Faq

Q1: what is a deep tillage and land preparation machine used for?

It is used for deep loosening below the normal working layer and upper soil preparation in one operation.

Q2: what is the difference between this machine and a standard subsoiler?

A standard subsoiler mainly loosens deep compacted soil. This machine adds rear disc harrow sections to break clods and prepare the upper soil surface.

Q3: when should I choose this instead of a standard subsoiler?

Choose this when the field needs deep loosening and the customer also wants to reduce the second pass with a disc harrow or similar surface preparation tool.

Q4: what is the difference between this and a combined land preparation machine?

A combined land preparation machine mainly focuses on reducing shallow surface preparation passes. This machine adds front subsoiler shanks for deep loosening.

Q5: can it improve soil aeration and water movement?

It can help improve soil aeration and water movement by loosening compacted layers, depending on soil condition and operating depth.

Q6: does it guarantee yield increase?

No. It supports better soil structure and root-zone conditions, but crop yield depends on soil, seed, weather, irrigation and management.

Q7: what tractor power is required?

The DL-DLP series covers 120–200+ HP by model.

Q8: what is the working width?

The working width range is 2.5–3.45 m.

Q9: what is the working depth?

The working depth range is 350–450 mm.

Q10: is it mounted or trailed?

The current DL-DLP series is supplied as mounted type.

Q11: can it replace a rotary tiller?

No. It is not a fine seedbed finishing tool. Very fine surface preparation may still require rotary tillage or finishing equipment depending on soil condition.

Q12: what should buyers confirm before ordering?

Tractor power, soil compaction depth, working width, working depth, shank configuration, soil type and upper soil preparation requirement should be confirmed.

Q13: can you provide OEM or private label?

Yes. OEM/ODM options are available for working width, shank configuration, rear disc section, frame structure, color, branding and export configuration.

Inquiry message

Please send us:

• Tractor HP

• Soil type

• Compaction condition

• Required working width

• Required working depth

• Whether your customer normally runs a harrow after subsoiling

We will help check whether the DL-DLP deep tillage and land preparation machine can reduce the need for separate subsoiling and harrowing in your customer’s field.